Metcal SMC Rework Cartridge Hoof Long 2.0mm 60° 700 Series SMC-7HF6020S

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Metcal SMC Rework Cartridge Hoof Long 2.0mm 60° 700 Series SMC-7HF6020SOverview CVC , SMC Solder Tip Cartridges are the standard soldering tip range for the Metcal CV 5200, CV 500, MX 500, MX 5200 and MX 5200 series soldering systems. All cartridges are available in 4 temperature ranges, 600 series nominally 330 C, 700 series nominally 390 C, 800 series nominally 440 C and 900 series nominally 470 C. The temperature series is designated by the first digit following the dash in the part number. e. g. 600 will all be CVC

Use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or relay and the large jaw alligator clips to get a good ground on the engine or to connect to the battery terminals

Stainless steel case

Tip Size: #1

DEF STAN 81-41 and ATA 300 standards

DMM test leads (red

Gauge has a valve remover and pocket clip

Legend: Caution Keep Clear

blade length 150 mm

750 Ω ohm in HART mode Loop supply Range 24 V DC Resolution N/A Accuracy ±10% Pump Specifications Maximum pressure generation 120 psi (8 BAR) (100 psi model) Pump to -30 psi in less than 15 seconds1 -100 psi in less than 45 seconds1 1

length stopper adjustable from 6 to 18 mm

-15 °C to 55 °C

Tip size: 3mm x 11

Exchange/Return Notes