Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Ballast Resistor (BAL6)For use with low impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance of less than 2 ohms. Includes set of 6 x 4. 7ohm 25w resistors mounted to a heatsink. These are also sold in a set of 4. Note that injector ballast resistors get quite hot at high injector duty cycles. These should stay mounted on the supplied heat sink and be bolted to the

Designed for the Honda S2000 AP1

- Blinkers utilize the BMW OEM switch on the steering column

3/8 NPT (Aluminium or Steel Mounting Bosses to suit)

Digital dash or OEM cluster (+$100)

and dual port for an OE type installation for Naturally Aspirated engines which use both the ICV port and the crankcase PCV port

it allows sequential injection and direct spark on engines with up to eight cylinders or four rotors

General Purpose PWM Outputs

Link G4+ Thunder (Note: Loom A and connector kits C and D may also be required)

net is the only place you will find these Titanium Valves

Download XtremeX Quickstart Guide

Would you like to use the factory X20 connector

To activate the reverse lights- Headlight switch which activates the vehicles running lights