Harmony XB5, Push button head, plastic, projecting, black, Ø22, spring return, booted, unmarked

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Harmony XB5, Push button head, plastic, projecting, black, Ø22, spring return, booted, unmarkedThis Harmony XB5, clear silicone booted black button head operates with a spring return mechanism. This silicone booted button head provides a simple solution to comply with hygiene requirement in food, beverage industries as well as healthcare and pharmaceuticals. It is easily combined with Harmony range of contact blocks to perform a large variety of control functions. It is impact resistant, dust resistant, water resistant and vibration resistant

selection of reset mode: Manual (marked H) or Automatic (marked A)

This product is compliant with IEC/EN 60669-2-2 standard

The operational current is 100A at 415VAC 50/60Hz for AC22A and AC23A utilization categories

The operational current is 500A at 1000VDC for DC-22A utilization categories

The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 60 millimeters

Contactor with no coil to allow a later selection and installation (coil to be ordered separately)

It is a keylock kit for Compact NSX

Its torque control (TCS) masters acceleration and deceleration

It provides a RJ45 connector located in front side of module

Ithe 32A 690V

It monitor drops in electrical insulation due to ageing of cables or extensions in the installation

Harmony 9001K diameter 30mm