TeSys D control relay - 3 NO + 2 NC - <= 690 V - 380 V AC standard coil

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

TeSys D control relay - 3 NO + 2 NC - <= 690 V - 380 V AC standard coilTeSys D control relay, 5 contacts (3NO + 2NC), 10A 690V, for control of electromagnetic loads AC 15 DC 13. It provides a 380V 50 60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles min and ambient temperature 40 +60C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green

The rated short circuit breaking capacity goes up to 20kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 400VAC conforming to EN/IEC 60898-1 standard

The Ue operational voltage is 250VDC

It is designed to fit with a standard 22mm control and signaling units

Open or Closed position of the associated device informations to a programmable logic controller

4 contacts (2NO+2NC)

Push Button 600Vac 10A 30Mm T K 2

The Up Voltage protection level in differential mode (between phase and neutral) is 1

Utilization categories are AC12/AC13/DC12/DC14

This ComPacT NSX100N is a complete 4P 3d fixed circuit breaker designed to optimize space and breaking capacity

It has a rating of 170A

6 Wires Terminal Block for Masterpact Nt

314mm high

Exchange/Return Notes