FILM DEVICES magnet 88mm with cheese plate

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

FILM DEVICES magnet 88mm with cheese plateReplacement or extra magnet with cheese plate for Camera Magnetic Mounting Kits. Each magnet has a 32 Kg holding force and is rubber coated which prevents damage to mounting surface. 1x 88mm rubber coated magnet with aluminum cheese plate cheese plate features 8x 1 4" threads and 3x 3 8" threads up to 70 Kg force per magnet use of a safety tether is always recommended

Each version runs on one 9 volt battery and has enough power to run high current microphones

it allows for flexible division into smaller charging units

Lemo 5p to angled Flash Synchro Socket (PC connector)

braided copper shield

Set the charging current to 4 A and enjoy ultra-fast charging

EMP5B: XLR P48V to electret Binder 5-pin >> Audio Ltd EN2

including acoustic pressure equalizers

This enables the mics to capture the ambient sound of the area

the sound captured has both a greater clarity - especially at high frequencies - and speech intelligibility compared to sound captured above the surface

Each device connected to the network will be continuously jammed from transmitter and on each device you can observe status information of all other devices in the network

the NiMH cells can be recharged up to 1000 times

Extensive research and development has been undertaken to optimize the sound coming from the sides and back of the microphone

Exchange/Return Notes