Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Hornady Match Grade Bushing .263The Hornady Match Grade Bushing . 263 is a single neck sizing bushing designed for use with Hornady Match Grade Bushing Dies. The bushing's inner diameter of . 263 inches contacts only the case neck during resizing, leaving the body of the case undisturbed and reducing brass working to a minimum. Handloaders select a bushing diameter to suit their brass neck thickness, giving precise control over neck tension and allowing them to tailor the fit

low-fuss lead that's quick to slip on and off in the field or at the peg

and tumbling is the simplest way to get there before sizing and priming

thorough scrub without the slop of an undersized brush

giving you the range to zero a scope where a standard mount would run out of travel — useful when correcting for a barrel that sits proud of the rail or when running a scope with limited internal adjustment

Each ring is secured to the rail by double hex screws (4mm

confirm the target and place the shot before the animal moves off

whereas conventional polymer tips can deform at high velocity — which shifts the point of impact

This is the untreated version

The Dime mini multi-tool easily collapses down for fast transport

Each warmer comes with a protective fleece bag to hold it against your hands or slip into gloves and boots

net and hide poles

The drawn gilding-metal jacket varies in thickness along its length — thicker over the shank

Exchange/Return Notes