Aluminium Halyard block with 60 mm sheave

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Aluminium Halyard block with 60 mm sheaveHalyard block A block designed for routing lines 90 typical for routing a halyard from the mast and aft. Plain bearing sheave with Delrin thrust bearings for low friction even if the line is not perfectly aligned with the sheave. Sheave Diameter: 60 mm Sheave Material: Aluminium Holder: Machined and anodized aluminium Radial Load: Plain bearing Axial Load: 4 mm Delrin thrust bearings To be mounted with three M6 bolts, c c between holes; 28 mm Overall

This is the lowest section in the Furlex 200S and -E double-groove foil system

100 mm hole spacing for fasteners and only c-c 25 mm between trim positions for finetuning

Single luff extrusion pack

Furlex genoa

D-shackle used for PBB 100 blocks and Furlex 404S/E/TD

This cleat can be paired with a tapered pad (sold separately) to adjust the cleat’s angle for better rope alignment

The block features a plain bearing with polymer bushing and two axial Delrin®

either for lines coming from above or from below

com/files/597-518-E

Whisker pole heavy conditions: 3600 mm

23 pcs M5x20 screws

M8 screws included